Industrial vacuum
ECOBULL M Z2-Z22 Additive Manufacturing

The ECOBULL M Z2-Z22 Additive Manufacturing, from the Depureco line, is an industrial vacuum cleaner, IIIC certified, designed for the suction of conductive metal powders in the additive 3D printing industry. The ECOBULL M Z2-Z22 Additive Manufacturing, powered by a powerful ATEX-certified side channel turbine, is equipped with a sophisticated explosion-proof system for the suction of conductive metal powders, which is obtained by immersing the suction nozzle directly in a bath of inert liquid present in the container. The motor is protected by a large surface (35,000 cm2) class H13 antistatic conical filter. Filtration also takes place through a metal grid filter and a nylon filter, capable of separating the metal particles from the inert liquid, to then be recovered and reused. The liquid is discharged by gravity through a practical tap placed at the bottom of the container. The 100 Lt container is made of AISI 304 stainless steel and has a convenient inspection window on the front to check the level of the liquid inside.
Industrial vacuum
ECOBULL M Z2-Z22 Additive Manufacturing |
Highlights


Industrial vacuum
ECOBULL M Z2-Z22 Additive Manufacturing |
Technical data
Type | side channel blower |
ATEX marking | II 3 G/D Ex htc IIIC T140°C Gc/Dc |
Voltage | 230 V |
IP | 55 |
Maximum vacuum | 230 mBar |
Continuous vacuum | 180 mBar |
Maximum air flow | 280 m3/h |
Safety valve | included |
Noise level | 72 dB(A) |
Frequency | 50/60 Hz |
Power | 2,4 HP |
Insulation class | F |
Type | cartridge |
Class EN 60335-2-69 | H Class |
Media | antistatic polyester |
Suction inlet | 50 Ø mm |
Dimensions | 660 X 800 mm |
Height | 1,630 mm |
Weight | 95 Kg |
Industrial vacuum
ECOBULL M Z2-Z22 Additive Manufacturing |
Options








Industrial vacuum
ECOBULL M Z2-Z22 Additive Manufacturing |
Accessories



Industrial vacuum
ECOBULL M Z2-Z22 Additive Manufacturing |
Gallery





















