Industrial Vacuum M 65 SP Longopac
M 65 SP Longopac is the most powerful industrial vacuum cleaner of the single-phase series in Depureco's range. Thanks to the 3 By-Pass motors, it is possible to reach the impressive power of 3.9 kW. The M65 SP industrial vacuum collects even the finest dust and prevents its dispersion thanks to the Longopac collection system. As standard, this vacuum cleaner is equipped with a 90,000 cm2 antistatic polyester filter certified Class M by the BIA (Berufsgenossenschaftliches Institut für Arbeitssicherheit) with a filtration efficiency of 1 µ. The SP filter cleaning system allows the filter to be cleaned using powerful jets of compressed air inside the filter (requires the use of compressed air). The vacuum cleaner is equipped with a Longopac system where The vacuumed material is automatically bagged. The product automatically falls into a high-strength transparent plastic disposable bag. The volume of the bag is decided by the operator who will seal and cut it without having contact with the sucked material. This makes it possible to work with fine and hazardous powders while ensuring the safety of the operator.
Industrial Vacuum M 65 SP Longopac|Highlights
Vacuum UnitSuction is provided by 3 by-pass motors. Each motor is operated by an independent switch that allows the operator to control suction performance. The motors are in a robust enclosure, with an insulating sponge to maintain a low noise level.
Class M FilterFiltration is provided by three cylindrical cartridges made of antistatic polyester. The filtering surface area is 90,000 cm2. The filter is class M certified (BIA | EN 60335-2-69) and stops particles down to 1 micron, preserving motors and the operator.
SP Filter cleaning filterDepureco's SP system cleans cartridges continuously with powerful jets of compressed air, without stopping suction. On-board compressor included.
Longopac®The material is collected inside a sturdy plastic bag called Longopac® that is 20 m long.
The sack is rolled below the chamber and is adaptable to any need. The operator, once the sack is filled, can close it above the vacuumed material that has automatically fallen inside, seal it, cut the sack segment with the debris, and dispose of it safely, with no contact between operator and material.
Industrial Vacuum M 65 SP Longopac|Technical data
Motor
Type | By-Pass |
Voltage | 230 V |
Continuous vacuum | 250 mBar |
Maximum air flow | 570 m3/h |
Noise level | 72 dB(A) |
Engines | 3 |
Frequency | 50/60 Hz |
Power | 5,2 HP |
Primary Filter
Type | Cartridge |
Class EN 60335-2-69 | IFA | BGIAM-PES |
Media | Antistatic Polyester |
Filter cleaning | SP |
Filtering efficiency (IFA) | M class |
Machine
Dimensions | 650x1100 mm |
Height | 1515 mm |
Weight | 155 Kg |
Industrial Vacuum M 65 SP Longopac|Options
AVAILABLE FILTER MEDIA
HEPA 14Absolute filter (EN 1822-5)
Industrial Vacuum M 65 SP Longopac|Accessories
P10867Iron reducer ø 70/40mmReducer for vacuum quick fitting in galvanised steel 70/40 mm diameter
P10866Iron reducer ø 70/50mmReducer for vacuum quick fitting in galvanised steel 70/50 mm diameter
Iron reducer ø 70mmReducer for vacuum quick fitting in galvanised steel 70 mm diameter
P11717“Y” reducer branch ø 70/50/50mmGalvanised steel “Y” reducer 70/50/50 mm
P11883LongopacLongopac spare box 4 rolls L=20 m each roll