XM35 FLOOR PREPARATION LP
INDUSTRIAL VACUUM
Single-phase Wet&Dry Industrial Vacuum Cleaners
The XM35 Floor Preparation is a dust extractor from the Depureco line that has been designed for the extraction of floor sanding dust. The vacuum cleaner can be connected to the sanding machine to vacuum directly the dust generated, ensuring air quality and the health of the operator. Inside the suction chamber, there is a conical cartridge filter with a large filtering surface (35,000 cm2), surrounded by a metal cylinder, excellent for stopping concrete dust while protecting the filter. This unit features special oversized rubber wheels to provide unmatched ease of movement. The ease of movement is also accentuated by the practical telescopic system that allows the machine to be compacted, reducing its size, to facilitate transport. The vacuum cleaner can be equipped with a 45 Lt painted steel container or with a practical Longopac system with an endless bag.
XM35 FLOOR PREPARATION LP
INDUSTRIAL VACUUM |
Highlights
SUCTION UNIT
The vacuum is generated by 2 by-pass motors. Each motor is managed by an independent switch, permitting the operator to control the intake performance.
The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.
The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.
FILTERING ELEMENT
The filtration is guaranteed by a sturdy polyester filtering cartridge. The cartridge is made to ensure large filter surface (35.000 cm2) in a compact space. This way air can pass through when the filter is dirty too. The filter is M Class (BIA | EN 60335-2-69) certified. It stops the particles till 1 micron, preserving the motors and the operator.
VIBRO Cleaning System
A filter cartridge cleaning system by vibration that maintains maximum suction efficiency even after prolonged use of compact machines, without the need for operator intervention.
LONGOPAC®
The vacuumed material is collected inside a durable plastic bag named Longopac® which is 20 mt. long. The bag is rolled up under the filter chamber and is adjustable for every need. The operator, once the bag is full, will seal the bag by closing it above the collected material, which falls automatically inside the bag during the vacuuming operations. The full part of the bag can subsequently be cut off and disposed of, in total safety, without any contact occurring between the operator and the material.
XM35 FLOOR PREPARATION LP
INDUSTRIAL VACUUM |
Technical data
Motor
Type | BY-PASS |
Voltage | 230 V |
Maximum vacuum | 250 mBar |
Maximum air flow | 380 m3/h |
Noise level | 72 dB(A) |
Engines | 2 |
Frequency | 50/60 Hz |
Power | 3.5 HP |
Primary Filter
Type | cartridge |
Class EN 60335-2-69 | M Class |
Media | antistatic polyester |
Filter cleaning | Vibration |
Filtering efficiency (IFA) | IFA/BGIA M-PES AL |
Machine
Suction inlet | 50 Ø mm |
Dimensions | 585 x 545 mm |
Height | 1395 mm |
Weight | 45 Kg |
XM35 FLOOR PREPARATION LP
INDUSTRIAL VACUUM |
Options
AVAILABLE FILTER MEDIA
HEPA 13
Absolute filter (EN 1822)
35.000 cm² filter surface
H13 Class Filter (EN 1822)
Glass fiber
35.000 cm² filter surface
H13 Class Filter (EN 1822)
Glass fiber
STRUCTURE AND OPTIONS
AB
Accessories basket
BX
Stainless steel bin AISI 304
GRD
Grounding
XM35 FLOOR PREPARATION LP
INDUSTRIAL VACUUM |
Accessories
P12348
Dry Kit Ø 50mm
Kit containing specific accessories for 50 mm diameter dust and solids vacuuming
P12350
Starter kit Ø 50mm
Basic kit containing specific accessories for 50 mm diameter solids and liquids vacuuming
P11883
Longopac
Longopac spare box 4 rolls L=20 m each roll