The M130 OIL P industrial sump vacuum is designed to vacuum and separate oil and metal chips from tanks, tables and machine tools. The filtered liquids are discharged by a pump for simultaneous discharge with the suction of the filtered liquid.
- Filters and reuses lubricating and cutting oils
- Simplified liquid collection and swarf management
- Simultaneous liquid suction and discharge
- Sturdy painted steel construction
2,6 kW
Oils and lubricants mixed shavings
130 Lt
Technical data
| Typologies | By-pass |
| Power | 2,6 kW - 3,5 HP |
| Frequency | 50/60 Hz |
| Voltage | 230 V |
| Vacuum in continuous run | 250 mBar |
| Maximum air flow | 380 m3/h |
| Noise level | 70 dB(A) |
| Suction inlet | 50 Ø mm |
| Collection system | Steel container |
| Solids capacity | 40 lt |
| Liquids capacity | 130 lt |
| Liquid discharge system | Discharge pump |
| Liquid discharge rate | 135 Lt/min |
| Dimensions | 565 x 770 mm |
| Height | 1415 mm |
| Weight | 53 Kg |
| Solid separation | Basket grid |
| Additional filter | Anti-foam filter |
Highlights
Suction is provided by 2 by-pass motors controlled by independent switches, allowing the operator to control suction performance. The motors are located inside a robust enclosure, with an insulating sponge to maintain a low noise level.
The collected liquid passes through a grid basket, which traps the chips and simplifies their disposal. In this way, even the smallest solid particles can be separated, making the filtered liquid suitable for reuse.
An electric level probe immediately stops suction when the liquid exceeds a certain container fill level, protecting the suction unit.
An electric immersion pump is installed inside the container and allows fast discharge of sucked and filtered liquids. Thanks to the check valve, it is possible to suction and discharge at the same time, without stopping the machine.
Features
Options
Accessories
