The Pre-Separator filters are essential units for centralized suction systems. They protect the suction unit and allow the collected material to be discharged into big bags, containers or processing belts. The filtering system is composed of cartridge filters with a system of cleaning with alternating air currents, which allows the filters to be cleaned effectively without having to interrupt the suction.
- Very high filtration efficiency
- Simple maintenance
- Integrated automatic cleaning of counter-current air filters
- Different options for the material discharge system are available
Fine, dry and clogging powders
Localized discharge
Technical data
| Intake suction inlet | 100 |
| Outlet suction inlet | 130 Ø mm |
| Collection system | Conveyed discharge |
| Dimensions | 800 x 800 mm |
| Height | 2227 mm |
| Primary filter type | Cartridge |
| Filter surface | 180000 cm2 |
| EN 60335-2-69 filtration class | M |
| Media | Antistatic polyester |
| Filter Cleaning System | Automatic SP |
Highlights
The tangential inlet facilitates the deposition of the sucked material due to the cyclonic effect.
Filtration is ensured by polyester cartridge filters in class M (filtration efficiency 1 micron) with high filtering surface area, which guarantees the passage of air even with dirty filter.
Automatic filter cleaning system in reverse flow of air at 6 bar (compressed air not supplied as standard). Each filter is cleaned at regular, alternately adjustable intervals without interrupting suction. Ideal for fine and difficult dust.
A specific discharge system, intermittent or continuous, can be installed depending on operational needs.
Options
Manual discharging butterfly valve
Double electro pneumatic discharging butterfly valve ATEX
Rotary valve for continuous hopper discharge
Accessories
