In the world of machining by chip removal, it is necessary to clean and maintain the CNC machining centers periodically and constantly, in order to always guarantee the right conditions of the coolant so that production maintains an adequate quality standard. Furthermore, old oils, not cleaned or replaced, are an important source of risk for the health of workers as they are an ideal place for the proliferation of bacteria, even dangerous for humans. The cleaning activities of the tanks are difficult and almost always viewed badly by the operator who sees them perform. They are also an important cost for the company, not only for the resources used in cleaning but above all for the cost of the machine downtime necessary to intervene on the CNC.
Over the years, Depureco has developed the most complete and performing range of solutions available on the market today. In fact, in a few tens of seconds, with a vacuum cleaner from the Oil and Swarf range it is possible to suck the coolant liquid together with the swarf and separate it with very efficient filtration. In this way, the life of the cooling lubricant can be significantly increased with an important saving of money. Furthermore, the involvement of the operator is totally different from manual cleaning. The risk of inhalation, contact, and irritation from the oil is drastically reduced.
Some of the advantages of using a Depureco vacuum cleaner are the speed in cleaning the tanks, saving on production stops, the possibility of filtering the coolant down to 5 microns, thus being able to recover and reuse the cutting oil, the operational ease in cleaning the tanks of the CNC and increased operational safety for the operator, avoiding contact with chips and liquid and decreasing the risks deriving from inhalation