XFLOOR 3 H Hepa approved Vacuum Cleaner for dust Type H
Modelli disponibili
With its certification for type H dust according to IEC60335-2-69:2021 ANNEX AA, XFLOOR 3 H represents a new standard of safety for all work involving very fine dust or dust harmful to humans. Extremely high filtration efficiency, great power and safe dust collection ensure maximum protection for operators during construction, de-lamination, floor or surface treatment operations.
- Certified vacuum cleaner for fine dust extraction type H
- Tangential entry with cyclonic effect
- Large surface area filter of class M
- Endless Bag collection to avoid contact with dust
3,9 kW
Toxic or hazardous dusts
Endless bag
Technical data
| Tipologie | By-pass |
| Potenza | 3,9 kW - 5,2 HP |
| Frequenza | 50/60 Hz |
| Voltaggio | 230 V |
| Vuoto in continuo | 250 mBar |
| Massima portata d'aria | 570 m3/h |
| Livello di rumorosità | 72 dB(A) |
| Bocca aspirante | 80 Ø mm |
| Sistema di raccolta | Endless Bag |
| Dimensioni | 920 x 565 mm |
| Altezza | 1430 mm |
| Altezza compatto | 1170 mm |
| Peso | 70 Kg |
| Tipologia filtro primario | Star |
| Superficie filtrante | 24000 cm2 |
| Classe filtrazione EN 60335-2-69 | M |
| Media | Polyester |
| Sistema Pulizia filtro | Manual |
| Filtro Assoluto Secondario | H14 - Included |
Highlights
Suction is provided by 3 by-pass motors controlled by a single switch that allows them to start sequentially, avoiding current spikes. The motors are inside a sturdy enclosure, with an insulating sponge to maintain a low noise level.
Filtration is provided by two progressive efficiency filters installed in series: a primary star polyester filter class M (filtering efficiency 1 micron) with high filtering surface area and an absolute secondary filter in class H14.
An ergonomic manual filter shaker allows the filter to be cleaned easily and quickly, removing dust and debris from the surface of the filter.
The material is collected inside a sturdy 20-meter-long adjustable roll plastic bag. Once the bag is filled, simply seal and remove it, with no contact between operator and material.
Dotazioni
Options
Accessories
