M70 OIL Industrial Vacuum Cleaner For Oil And Swarf
Available models
The M70 OIL industrial vacuum cleaner is designed to vacuum and separate oil and metal chips from tanks, tables and machine tools. The filtered liquids are discharged by gravity, thanks to a discharge hose located at the bottom of the container. Optionally, a pump can be installed to discharge simultaneously with the suction of the filtered liquid.
- Filters and reuses lubricating and cutting oils
- Simplified liquid collection and swarf management
- Draining the liquid is made easier thanks to a drain tube
- Sturdy painted steel construction
2,6 kW
Oils and lubricants mixed shavings
70 Lt
Technical data
| Typologies | By-pass |
| Power | 2,6 kW - 3,5 HP |
| Frequency | 50/60 Hz |
| Voltage | 230 V |
| Vacuum in continuous run | 250 mBar |
| Maximum air flow | 380 m3/h |
| Noise level | 70 dB(A) |
| Suction inlet | 50 Ø mm |
| Collection system | Steel container |
| Solids capacity | 40 lt |
| Liquids capacity | 70 lt |
| Liquid discharge system | Discharge hose |
| Liquid discharge rate | 135 Lt/min |
| Dimensions | 565 x 770 mm |
| Height | 1210 mm |
| Weight | 48 Kg |
| Solid separation | Basket grid |
| Additional filter | Anti-foam filter |
Highlights
Suction is provided by 2 by-pass motors controlled by independent switches, allowing the operator to control suction performance. The motors are located inside a robust enclosure, with an insulating sponge to maintain a low noise level.
The collected liquid passes through a grid basket, which traps the chips and simplifies their disposal. In this way, even the smallest solid particles can be separated, making the filtered liquid suitable for reuse.
An electric level probe immediately stops suction when the liquid exceeds a certain container fill level, protecting the suction unit.
A ball valve located at the bottom of the container allows the collected liquids to be easily discharged by gravity.
Features
Options
Accessories
