The DF 075 Z2-Z22 is an ATEX Z22 certified industrial vacuum cleaner with a three-phase fan that allows you to vacuum volatile or suspended dust with an articulated arm or extraction hood. Inside the vacuum cleaner there is a large surface filter in antistatic polyester (24,000 cm2), M class certified, with a filtration efficiency of 1 micron, to vacuum electrostatically charged dust in total safety. In addition, it is possible to install an H14 filter for situations that require the suction of the finest dust. To clean the filter there is a very effective manual filter cleaning system as standard. Thanks to a lever outside the filtering chamber, the operator is able to shake the filter and deposit the dust directly in the collection container. On request, it is possible to install an automatic piston filter shaking system or a counter-current filter cleaning system. The unit is equipped with a release container on wheels with a capacity of 65Lt in AISI 304 stainless steel.
SUCTION UNIT
The vacuum is generated by an ATEX certified electric fan designed specifically to guarantee the best air flow while maintaining a good level of depression.
FILTERING ELEMENT
The filtration is guaranteed by an M class polyester filter. The star shape enables air to flow through the filter even when it is dirty. The fabric of the filter is classified as M Class (BIA | EN 60335-2-69). This means that all particles till 1 micron are stopped by the filter so as to protect the blower and the operator around the vacuum cleaner.
INLET DEFLECTOR
The inlet deflector is specifically designed to convey the material towards the container. Connection flanges or reduction flanges of different diameters (100 - 200 mm) can be attached to the deflector according to requirements.
COLLECTION BIN
The vacuumed material is collected in an AISI 304 stainless steel container, equipped with a metal handle that enables the bin to be detached from the machine, to avoid any spark that could be generated by the electrostatic charge. Thanks to the 4 sturdy pivoting wheels, the bin can be moved very easily to then dispose of the collected material. Each wheel is reinforced to guarantee maximum stability during handling.
INDUSTRIAL VACUUM DF 075 Z2-Z22 II3GD |
Technical data
Motor
Type
fan
ATEX marking
II 3 G/D Ex htc IIIB T140°C Gc/Dc
Voltage
400
V
IP
55
Maximum air flow
400 | 80001,000
m3/h
Noise level
65
dB(A)
Frequency
50/60
Hz
Power
1
HP
Insulation class
F
Maximum vacuum
180 | 160130
mm/H2O
Static depression available
180 | 150123
Primary Filter
Type
star filter
Class EN 60335-2-69
M Class
Media
antistatic polyester
Filter cleaning
manual shaker
Machine
Suction inlet
70 | 1000120
Ø mm
Dimensions
660 x 800
mm
Height
1,630
mm
Weight
80
Kg
Conical cyclone
incluso
INDUSTRIAL VACUUM DF 075 Z2-Z22 II3GD |
Options
AVAILABLE FILTER MEDIA
PTFE ANT
AntistatIc PTFE filter (M class EN 60335-2-69)
AVAILABLE FILTER CLEANING SYSTEMS
PSC
Semiautomatic pneumatic filter shaker
SP
Automatic reverse jet cleaning system
Antistatic M class filter (EN 60335-2-69), 3 Polyester filter cartridges, 9 m² filter surface
P10095
Galvanized metal clamp ø 100mm
Metal clamp with galvanised steel screw 100 mm diameter
P12358
Galvanized metal clamp ø 120mm
Metal clamp with galvanised steel screw 120 mm diameter
P12359
Galvanized metal clamp ø 150mm
Metal clamp with galvanised steel screw 150 mm diameter
P12300/100
Flanged reduction for hose ø 100mm
Coupling flange on DF industrial vacuum for 100 mm diameter flexible hose
P12300/120
Flanged reduction for hose ø 120mm
Coupling flange on DF industrial vacuum for 120 mm diameter flexible hose
P12300/150
Flanged reduction for hose ø 150mm
Coupling flange on DF industrial vacuum for 150 mm diameter flexible hose
P12334
Flanged reduction for arm ø 160mm
Coupling flange on DF industrial vacuum for 160 mm diameter flanged arm
P12335/70
“Y” reducer for DF ø 70/70mm
70mm diameter “Y” reducer for DF industrial vacuums
P12335/100
“Y” reducer for DF ø 100/100mm
100mm diameter “Y” reducer for DF industrial vacuums
P12335/120
“Y” reducer for DF ø 120/120mm
120mm diameter “Y” reducer for DF industrial vacuums
P12370
ATEX certified stainless steel suction arm ø 150mm/ L 3m
150mm diameter suction arm jointed in three parts for a total length of 3 metres. Construction in AISI 316 stainless steel, completely conductive and ATEX certified for working with certified vacuum cleaners and in ATEX classified environments. On request the ATEX arm can be supplied entirely in grade 316 stainless steel suitable for food, chemical […]
