The most compact of the range of ACD Depureco classified vacuum cleaners for extracting combustible dust in areas not classified Atex. The two powerful single-phase motors that can be operated independently, the two progressively more efficient filters M and H14, the complete earthing and grounding system and the 45 liter stainless steel container guarantee maximum safety in a compact, safe and easy to handle product. Suction filter bags and antistatic accessories are available as optional extras.
- Classified ACD for the suction of combustible dust in areas not classified Atex
- Compact and easy to maintain
- 2 levels of progressive filtration
- Vacuum gauge to monitor performance
2,6 kW
Combustible dusts
45 Lt
Technical data
| Typologies | By-pass |
| Power | 2,6 kW - 3,5 HP |
| Frequency | 50/60 Hz |
| Voltage | 230 V |
| Vacuum in continuous run | 250 mBar |
| Maximum air flow | 380 m3/h |
| Insulation class | 54 | F IP |
| Noise level | 72 dB(A) |
| Suction inlet | 50 Ø mm |
| Collection system | AISI304 stainless steel container |
| Capacity | 45 Lt |
| Dimensions | 516 x 545 mm |
| Height | 1250 mm |
| Weight | 38 Kg |
| Primary filter type | Star |
| Filter surface | 6000 cm2 |
| EN 60335-2-69 filtration class | M |
| Media | Antistatic polyester |
| Secondary Absolute Filter | H14 - Included |
Highlights
Suction is provided by 2 by-pass motors controlled by independent switches, allowing the operator to control suction performance. The motors are located inside a robust enclosure, with an insulating sponge to maintain a low noise level.
Filtration is provided by two progressive efficiency filters installed in series: a primary star polyester filter class M (filtering efficiency 1 micron) with high filtering surface area and an absolute secondary filter in class H14.
The vacuum unit is a powerful Brushless motor, suitable for continuous work. Two filters are installed on the vacuum cleaner head: one to protect the motor and the other placed on the air outlet. The air that escapes is totally carbon-free.
The material is collected inside an AISI 304 stainless steel container, complete with a metal handle that allows its release, to avoid any sparks that could be generated by the electrostatic charge.
Features
Options
Accessories
