M65/100 Jet Clean Tan®
INDUSTRIAL VACUUM
Single-phase Wet&Dry Industrial Vacuum Cleaners
The M65/100 Jet Clean® is the most powerful cyclone industrial vacuum cleaner of the single-phase series in Depureco's range. Thanks to the 3 By-Pass motors it is possible to reach the impressive power of 3.9 kW. The M65/100 Jet Clean® industrial vacuum cleaner works in all conditions: dust, chips, liquids difficult materials with hoses as long as several meters. As standard this vacuum cleaner is equipped with a 35,000 cm2 PTFE filter certified Class M by the BIA (Berufsgenossenschaftliches Institut für Arbeitssicherheit) with a filtration efficiency of 1 µ. The JetClean® filter cleaning system allows the filter to be cleaned using the pressure differential between the inside and outside of the vacuum cleaner.
The tangential inlet and protective sleeve of the filter cartridge allow the cyclonic effect of dust to be used to slow it down and drop it inside the container, protecting the filter.
The M65/100 Jet Clean® cyclonic vacuum cleaner is equipped with a practical release container on wheels that allows the suctioned material to be collected and conveniently disposed of. The container can be either 65-liter or 100-liter; in both cases it is equipped with reinforced external support for the 4 pivoting wheels in order to handle it safely even when there are several kilograms of material inside. A kit is available upon request that allows the container to be handled with a forklift and consequently unloaded by tilting. In case direct bagging is to be used, the M 100 Jet Clean® LP version is available.
M65/100 Jet Clean Tan®
INDUSTRIAL VACUUM |
Highlights
SUCTION UNIT
The vacuum is generated by 3 by-pass motors. Each motor is managed by an independent switch, permitting the operator to control the intake performance. The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.
FILTERING ELEMENT
The filtration is guaranteed by a sturdy polyester filtering cartridge. The cartridge is made to ensure large filter surface in a compact space. This way air can pass through when the filter is dirty too. The filter is M Class (BIA | EN 60335-2-69) certified. It stops the particles till 1 micron, preserving the motors and the operator.
COLLECTION BIN
The material is collected inside a painted container equipped with a metal handle which enables the bin to be detached from the machine. Thanks to its 4 swiveling wheels, the bin can be easily moved and emptied. Each wheel is reinforced to guarantee maximum stability during handling.
Jet Clean® FILTER CLEANING SYSTEM
The vacuum cleaner is equipped with a new cleaning system named JetClean® designed by Depureco. Thanks to the different pressure between the outside and the inside of the vacuum cleaner, the system generates a jet flow inside the cartridge, detaching the dust from the filter surface. It is a fast and efficient way to keep the filter clean during the operations, without stopping the motors.
M65/100 Jet Clean Tan®
INDUSTRIAL VACUUM |
Technical data
Motor
Type | by-pass |
Voltage | 230 V |
Maximum vacuum | 250 mBar |
Maximum air flow | 570 m3/h |
Noise level | 72 dB(A) |
Engines | 3 |
Frequency | 50/60 Hz |
Power | 5,2 HP |
Primary Filter
Type | cartridge |
Class EN 60335-2-69 | M Class |
Media | PTFE |
Filter cleaning | Jet Clean |
Filtering efficiency (IFA) | IFA/BGIA M-PES |
Machine
Suction inlet | 70 Ø mm |
Dimensions | 660 x 800 mm |
Height | 1300/1515 mm |
Weight | 80 Kg |
M65/100 Jet Clean Tan®
INDUSTRIAL VACUUM |
Options
AVAILABLE FILTER MEDIA
HEPA 14
Absolute filter (EN 1822)
28.000 cm² filter surface
H14 Class Filter (EN 1822)
Glass fiber
28.000 cm² filter surface
H14 Class Filter (EN 1822)
Glass fiber
STRUCTURE AND OPTIONS
100 Lt
100 Lt bin
AB
Accessories basket
BX
Stainless steel bin AISI 304
GRD
Grounding
KDP
Differential pressure KIT for bag
LP
Longopac bagging system
SD
Sliding damper
RC Schuko
Remote control by power tool (MAX 2000 W)
M65/100 Jet Clean Tan®
INDUSTRIAL VACUUM |
Accessories
P00327
Wet & Dry fixed brush ø 50mm
Wet & dry fixed accessory with 50 mm diameter flexible hose fitting
P11887
Wet & Dry Kit Ø 50mm
Kit containing specific accessories for 50 mm diameter solids and liquids vacuuming
P12350
Starter kit Ø 50mm
Basic kit containing specific accessories for 50 mm diameter solids and liquids vacuuming
M65/100 Jet Clean Tan®
INDUSTRIAL VACUUM |
Gallery
M65/100 Jet Clean Tan®
INDUSTRIAL VACUUM |
Resources
M65/100 Jet Clean Tan®
INDUSTRIAL VACUUM |
Request free quote
Caricamento …