Industrial Vacuum TX 750 SP TAN Longopac
The TX 750 P SP TAN Longopac industrial vacuum cleaner stands out for its power, maneuverability, and compactness. Equipped with a 7.5 KW side channel blower, it is ideal for maintenance-free continuous operation. Inside the filter chamber, there are 3 cylindrical cartridges (90,000 cm2), certified Class M with a filtration efficiency of 1 micron, suitable for even the finest dust. On this vacuum cleaner, there is an SP filter cleaning system that uses powerful jets of compressed air to ensure optimal performance. The tangential inlet allows the cyclonic effect of dust to be used to slow it down and drop it inside the bag while protecting the filter. The unit can be equipped with an H14 absolute filter upon request. The JetClean® filter cleaning system allows the filter to be cleaned using the pressure differential between the inside and outside of the vacuum cleaner. Finally, the vacuum cleaner is equipped with a Longopac collection system, which automatically bags the sucked material into high-strength transparent plastic disposable bags, the volumes of which can be managed by the operator without coming into contact with the sucked material.
Translated with DeepL.com (free version)
Power
7,5 kW
Surface
90.000 cm2
Capacity
Longopac
Industrial Vacuum TX 750 SP TAN Longopac|Highlights
Vacuum UnitThe suction unit is a side channel turbine with direct coupling between motor and impeller. The turbine is equipped with a safety valve that ensures continuous, maintenance-free operation. A metal silencer is included as standard in the turbine to ensure a low noise level.
Class M FilterFiltration is provided by three cylindrical cartridges made of antistatic polyester. The filtering surface area is 90,000 cm2. The filter is class M certified (BIA | EN 60335-2-69) and stops particles down to 1 micron, preserving motor and operator
SP filter cleaning systemDepureco's SP system cleans cartridges continuously with powerful jets of compressed air, without stopping suction. On-board compressor included.
Longopac®The material is collected inside a sturdy plastic bag called Longopac® that is 20 m long. The sack is rolled below the chamber and is adaptable to any need. The operator, once the sack is filled, can close it above the vacuumed material that has automatically fallen inside, seal it, cut the sack segment with the debris, and dispose of it safely, with no contact between operator and material.
Industrial Vacuum TX 750 SP TAN Longopac|Technical data
Motor
| Type | Side Channel Blower |
| Voltage | 400 V |
| Continuous vacuum | 260 mBar |
| Maximum air flow | 730 m3/h |
| Safety valve | included |
| Noise level | 79 dB(A) |
| Frequency | 50/60 Hz |
| Power | 10 HP |
Primary Filter
| Type | 3x Cylindrical cartridges |
| Class EN 60335-2-69 | IFA | BGIAM-PES |
| Filter cleaning | SP |
| Filtering efficiency (IFA) | M Class |
Machine
| Suction inlet | 80 Ø mm |
| Dimensions | 650x1.100 mm |
| Height | 1.400 mm |
| Weight | 200 Kg |
| Conical cyclone | yes |
Industrial Vacuum TX 750 SP TAN Longopac|Accessories
P00278Iron reducer ø 80/50mmReducer for vacuum quick fitting in galvanised steel 80/50 mm diameter
P00277Iron reducer ø 80/40mmReducer for vacuum quick fitting in galvanised steel 80/40 mm diameter
P00315“Y” reducer branch ø 80/50/50mmGalvanised steel “Y” reducer 80/50/50 mm
