INDUSTRIAL VACUUM
XM TORCH 1M
Welding Fume Extractors
The XM Torch 1M industrial vacuum cleaner is the ideal solution for extracting fumes directly from the welding torch. This vacuum cleaner from Depureco's welding fumes range is equipped with one / two powerful By-Pass motors that guarantee up to 190 m3 / h of airflow each. The industrial vacuum is controlled directly by the welding machine. A sophisticated sensor positioned on the vacuum allows detecting when there is a flow of current in the ground cable located in the special clip. Depureco's XM Torch 1M industrial vacuum cleaner is equipped with a cellulose filter that allows you to filter welding fumes in total safety. On request, it is also possible to install an H14 filter.
INDUSTRIAL VACUUM
XM TORCH 1M|Highlights
SUCTION UNITThe vacuum is generated by 1 by-pass motor. Each motor is managed by an independent switch, permitting the operator to control the intake performance.
The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.
The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.
FILTERING ELEMENTThe filtration is guaranteed by a sturdy polyester filtering cartridge. The cartridge is made to ensure large filter surface (40.000 cm2) in a compact space. This way air can pass through when the filter is dirty too. The filter is M Class (BIA | EN 60335-2-69) certified. It stops the particles till 1 micron, preserving the motors and the operator.
Jet Clean® FILTER CLEANING SYSTEMThe vacuum cleaner is equipped whit a new filter cleaning system named JetClean® designed by Depureco. Using the difference in pressure outside and inside the vacuum cleaner, the system generates an air jet which by travelling through the cartridge detaches the dust from the filter's surface. It is a fast and efficient way to keep the filter clean during operations, without stopping the vacuuming operations.
REMOTE CONTROLA sensor installed on one side of the unit enables the operator to control the machine directly from the welding unit. Passing the cable in the clip will make it so that when the welding starts the vacuum cleaner will start at the same time.
INDUSTRIAL VACUUM
XM TORCH 1M|Technical data
Motor
Type | By-Pass |
Voltage | 230 V |
Maximum vacuum | 250 mBar |
Maximum air flow | 190 m3/h |
Noise level | 72 dB(A) |
Engines | 1 |
Frequency | 50/60 Hz |
Primary Filter
Type | cartridge |
Diameter | 305 mm |
Class EN 60335-2-69 | M Class |
Media | polyester PTFE |
Filter cleaning | Jet Clean |
Filtering efficiency (IFA) | IFABGIA M-PES |
Machine
Suction inlet | 50 Ø mm |
Dimensions | 534 x 471 mm |
Height | 983 mm |
Weight | 36 Kg |
INDUSTRIAL VACUUM
XM TORCH 1M|Options
AVAILABLE FILTER MEDIA
HEPA 14Absolute filter (EN 1822)
22.000 cm² filter surface
H14 Class Filter (EN 1822)
Glass fiber
22.000 cm² filter surface
H14 Class Filter (EN 1822)
Glass fiber
STRUCTURE AND OPTIONS
BXStainless steel bin AISI 304
GRDGrounding
INDUSTRIAL VACUUM
XM TORCH 1M|Accessories
P12349Starter kit Ø 40mmBasic kit containing specific accessories for 40 mm diameter solids and liquids vacuuming
P12302Reduction rubber sleeve for “EVA” hose Ø 50/40mmAntistatic carbon-filled rubber sleeve for 50/40 mm diameter EVA flexible hose
P12000Suction hood (400x50mm)Galvanised steel suction hood for welding fumes or suspended dusts. Connection for 50mm diameter pipe with bracket and magnet for positioning it
P12350Starter kit Ø 50mmBasic kit containing specific accessories for 50 mm diameter solids and liquids vacuuming